Skip to content
Lagersmit Mining Header

MEASURE. PREDICT. SAVE.

Reliability you can measure. Make seal performance visible, predict remaining lifetime and plan maintenance before sudden failure and unnecessary downtime.

Uptime under pressure.
M.P.S. | MEASURE. PREDICT. SAVE.
RELIABILITY YOU CAN MEASURE
CONDITION-BASED CONTROL
M.P.S. | MEASURE. PREDICT. SAVE.
RELIABILITY YOU CAN MEASURE
CONDITION-BASED CONTROL

THE PROBLEM IS THE UNEXPECTED.

Abrasive media, fluctuating throughput and continuous operation push mining pumps and sealing systems to the limit.




 

Manual adjustment

Gland packing requires continuous manual adjustment, consumes large volumes of water and accelerates shaft wear through leakage.

 

Precision vulnerability

Mechanical seals demand exact installation and alignment and are highly sensitive to contamination and dry running.

 

Unplanned downtime

In both cases, maintenance becomes harder to predict and uptime is put under pressure.

 

HOW M.P.S. WORKS.

The Liquidyne® pump shaft seal uses drain flow as a direct indicator of seal condition. By measuring this flow, your team can track wear over time and establish a clear performance trend from the moment of commissioning.

When flow reaches approximately 20% of its original value, maintenance can be planned in advance, avoiding sudden failure and unnecessary downtime. An optional flow meter can record the flow without interrupting operation and connect to a PLC for automated alerts and data logging.

 

Mining how it works

TAKE BACK CONTROL.

PREDICTABLE LIFETIME

Maintenance is scheduled based on actual condition rather than assumptions.

predictable lifetime wit-1

 

BEARING PROTECTION

Early intervention helps prevent abrasive wear, overheating and bearing damage.

bearing protection wit-1

 

ENERGY SAVINGS

Operate with minimal friction and heat.

energy savings wit-1

 

LOWER WATER USE

Reduce routine adjustment and leakage.

lower water use wit-1

INSTALL AND FORGET

Monitoring drain flow is sufficient to assess performance, with minimal attention required.

install and go wit-1

BUILT FOR REAL MINING CONDITIONS.

GLAND PACKING
  1. Maintenance impact: continuous adjustment, water use and shaft wear through leakage
  2. Mining conditions: performance depends heavily on operator intervention
  3. Condition insight: performance is not directly measurable 
  4. Installation: standard maintenance routine 

MECHANICAL SEAL
  1. Maintenance impact: costly inspections, replacements and sudden downtime can result 
  2. Mining conditions: highly sensitive to contamination and dry running 
  3. Condition insight: seal condition is not directly visible 
  4. Installation: exact installation and alignment required 
LIQUIDYNE®
  1. Maintenance impact: maintenance can be planned based on actual condition 
  2. Mining conditions: engineered to perform where precision alone is not enough 
  3. Condition insight: drain flow provides a direct indicator of seal condition 
  4. Installation: fits most existing stuffing box applications and makes retrofitting easier 

 

PROVEN WHERE PERFORMANCE MATTERS.

At a customers phosphate production site, a Liquidyne® WA220 with flushing water was installed and has proven highly successful in operation.

Liquidyne® has delivered up to 200% savings on bearing assemblies while significantly improving pump reliability. Nutrien is now evaluating which additional pumps can be upgraded with Liquidyne® seals.

 

Lagersmit Mining Page

 

“KEEP THOSE LIQUIDYNES COMING.”


Customer case quote.

 

 

PROVE IT IN YOUR OWN OPERATION.

Every mining operation is unique. Slurry characteristics, operating conditions and maintenance strategies differ from site to site. That is why Lagersmit invites mining operators to experience Liquidyne® through an on-site pilot.

We work alongside your team to validate Liquidyne® under real operating conditions. Together, we measure performance, monitor seal condition and evaluate the results using operational data from your own pumps.

 

DISCUSS YOUR MINING APPLICATION

CONTINUE WITH THE DETAILS YOU NEED.