M.P.S. | MEASURE. PREDICT. SAVE.
RELIABILITY YOU CAN MEASURE
CONDITION-BASED CONTROL
M.P.S. | MEASURE. PREDICT. SAVE.
RELIABILITY YOU CAN MEASURE
CONDITION-BASED CONTROL
THE PROBLEM IS THE UNEXPECTED.
Abrasive media, fluctuating throughput and continuous operation push mining pumps and sealing systems to the limit.
Manual adjustment
Gland packing requires continuous manual adjustment, consumes large volumes of water and accelerates shaft wear through leakage.
Precision vulnerability
Mechanical seals demand exact installation and alignment and are highly sensitive to contamination and dry running.
Unplanned downtime
In both cases, maintenance becomes harder to predict and uptime is put under pressure.
HOW M.P.S. WORKS.
The Liquidyne® pump shaft seal uses drain flow as a direct indicator of seal condition. By measuring this flow, your team can track wear over time and establish a clear performance trend from the moment of commissioning.
When flow reaches approximately 20% of its original value, maintenance can be planned in advance, avoiding sudden failure and unnecessary downtime. An optional flow meter can record the flow without interrupting operation and connect to a PLC for automated alerts and data logging.

TAKE BACK CONTROL.
- 01 PREDICTABLE LIFETIME
- 02 BEARING PROTECTION
- 03 ENERGY SAVINGS
- 04 LOWER WATER USE
- 05 INSTALL AND FORGET
PREDICTABLE LIFETIME
Maintenance is scheduled based on actual condition rather than assumptions.

BEARING PROTECTION
Early intervention helps prevent abrasive wear, overheating and bearing damage.

ENERGY SAVINGS
Operate with minimal friction and heat.

LOWER WATER USE
Reduce routine adjustment and leakage.

INSTALL AND FORGET
Monitoring drain flow is sufficient to assess performance, with minimal attention required.

BUILT FOR REAL MINING CONDITIONS.
- Maintenance impact: continuous adjustment, water use and shaft wear through leakage
- Mining conditions: performance depends heavily on operator intervention
- Condition insight: performance is not directly measurable
- Installation: standard maintenance routine
- Maintenance impact: costly inspections, replacements and sudden downtime can result
- Mining conditions: highly sensitive to contamination and dry running
- Condition insight: seal condition is not directly visible
- Installation: exact installation and alignment required
- Maintenance impact: maintenance can be planned based on actual condition
- Mining conditions: engineered to perform where precision alone is not enough
- Condition insight: drain flow provides a direct indicator of seal condition
- Installation: fits most existing stuffing box applications and makes retrofitting easier
PROVEN WHERE PERFORMANCE MATTERS.
At a customers phosphate production site, a Liquidyne® WA220 with flushing water was installed and has proven highly successful in operation.
Liquidyne® has delivered up to 200% savings on bearing assemblies while significantly improving pump reliability. Nutrien is now evaluating which additional pumps can be upgraded with Liquidyne® seals.

“KEEP THOSE LIQUIDYNES COMING.”
Customer case quote.
PROVE IT IN YOUR OWN OPERATION.
Every mining operation is unique. Slurry characteristics, operating conditions and maintenance strategies differ from site to site. That is why Lagersmit invites mining operators to experience Liquidyne® through an on-site pilot.
We work alongside your team to validate Liquidyne® under real operating conditions. Together, we measure performance, monitor seal condition and evaluate the results using operational data from your own pumps.
